CONTACT
0086-21-37588258
No. 333, Chuangye Road, Xindai Town, Pinghu City, Jiaxing, Zhejiang
0086-21-37588258
No. 333, Chuangye Road, Xindai Town, Pinghu City, Jiaxing, Zhejiang
T：T2、T4、T6、T7、T8、T10、T12、T16、T20、T25
Z：Z2、Z4、Z6、Z7、Z8、Z10、Z12、Z16、Z20、Z25
JRTM：JRTM2、JRTM4、JRTM6、JRTM7、JRTM8、JRTM10、JRTM12、JRTM16、JRTM20、JRTM25
RTM7、JRTM8、JRTM10、JRTM12、JRTM16、JRTM20、JRTM25
JRTM：JRTM2、JRTM4、JRTM6、JRTM7、JRTM8、JRTM10、JRTM12、JRTM16、JRTM20、JRTM25
RTM7、JRTM8、JRTM10、JRTM12、JRTM16、JRTM20、JRTM25
A.轉向箱 初期使用二周或100-200小時，為初摩耗期，這之間可能有少許金屬摩耗粉粒，請務必清潔內部，并換新潤滑油。
B.長期使用時，每半年-一年或1000-2000小時更換一次潤滑油。
潤滑油種類：本產品潤滑油采用中國石油全效齒輪油90-120度，低轉速、輕負荷條件，建議采用全效齒輪油90度，重負荷、高溫的條件，建議采用全效齒輪油120度。
T series spiral bevel gear steering box
Widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other mechanical equipment, assembly line and other industries.
Housing: High-rigidity FC-25 cast iron casting;
Gear: The gear is made of high-quality and high-purity alloy steel 20CrMnTi carburized and quenched, and ground;
Spindle: alloy steel quenched and tempered shafts, high hanging load capacity;
Bearings: equipped with heavy-duty roller bearings;
Oil seal: the oil seal of double seal lip has both dustproof and anti-leakage capabilities
| Performance Characteristics： | ◆ T series spiral bevel gear steering box, standardized, multiple varieties, all the speed ratios are actual transmission ratios. The average efficiency is 98%. ◆ Single axis, double horizontal axis, single longitudinal axis, and double longitudinal axis are available. ◆ The spiral bevel gear can run in both forward and reverse directions, and the low-speed or high-speed transmission is stable, and the noise is low, the vibration is small, and the bearing capacity is large. ◆ When the speed ratio is not 1:1, the horizontal axis input and vertical axis output are deceleration, and the vertical axis input and horizontal axis output are increasing speed. |
| Technical Parameters： | Speed ratio range: 1/1 1.5/1 2/1 2.5/1 3/1 4/1 5/1 Torque range: 11.2-5713 Nm Power range: 0.014-335 kW |
| Model Mark： |  |
| Type： | T2 T4 T6 T7 T8 T10 T12 T16 T20 T25 |
